Printek 4503 User Manual
Page 128
Printek Emulation
Page 7-16
m DPI Graphics
ESC # m n1 n2 data
Selects eight wire graphics of density m as listed in the following table for
n2 + (n1 x
256) columns of data.
m
Density
90
90 dpi
100
100 dpi
135
135 dpi
150
150 dpi
NOTE: Horizontal movement of the FormsPro 4000 print head is measured in
intervals of 1/720 of an inch. The supported graphics densities above may not be an
integral multiple of this resolution. For example, at 150 dpi, dots may be printed
every 4.8/720 of an inch. The printer is not really capable of printing dots every
4.8/720 of an inch. It will print the dots as accurately as possible, with some at 4/720
of an inch and some at 5/720 of an inch. The overall average will be 4.8/720 of an
inch.
Example: The following escape sequence will print five bytes of graphics data at 150
dpi. The resulting figure will resemble a backslash character, "\".
Escape Sequence:
ESC
#
150
0
5
64
32
16
8
4
Hexadecimal:
1B
23
96
00
05
40
20
10
08
04