Printek 4503 User Manual
Page 34
Epson FX Emulation
Page 3-6
Escape Sequence:
ESC
M
Hexadecimal:
1B
4D
Select 15 CPI
ESC g
Selects 15 cpi. Cancels 12 cpi. Condensed mode is unaffected. The resulting
character spacing will be 15 cpi, even if condensed mode is also selected.
Escape Sequence:
ESC
g
Hexadecimal:
1B
67
Select Condensed Mode
SI
(or)
ESC SI
Selects condensed mode. The resulting character spacing will be 17.14 cpi if 10 cpi
was selected, or 20 cpi if 12 cpi was selected. If 15 cpi was selected, condensed
mode will have no affect.
Control code:
SI
Hexadecimal:
0F
Escape Sequence:
ESC
SI
Hexadecimal:
1B
0F
Cancel Condensed Mode
DC2
Cancels condensed mode set by SI or ESC SI.
Control code:
DC2
Hexadecimal:
12
Select double-wide mode (one line)
SO
(or)
ESC SO
Selects double-wide mode for one line. Double-wide mode doubles the width of all
characters, but does not affect character height. This mode is cancelled by a carriage
return or DC4.
Control code:
SO
Hexadecimal:
0E
Escape Sequence:
ESC SO
Hexadecimal:
1B
0E