Primera Technology RX900 - Manual (Page 20)

16 Label Stock
There are two different output modes:
Present labels? - Yes (Default). This setting will cause the
printer to feed the last label printed forward so that it and the
previously printed labels can be torn off using the tear bar. If
no other jobs are sent to the printer within one second after the
last label has printed, the last printed label will present for tear
off.
Present labels? - No (Use with Rewinder). In this mode the
label stock does not move after the last label is printed. This
means that part of the last label printed is still in the printer.
This should be used only if you have a label rewinder
attached. To retrieve the final label you must press the
Load/Feed button on the printer control panel.
RX900.qxd 2/17/2011 1:28 PM Page 16
TOC INDEX