Primera Technology RX900 User Manual

Page 65

Advertising
background image

Notices and Warnings

61

For Users in Canada: This digital apparatus does not exceed the Class B limits

for radio noise for digital apparatus set out on the Radio Interference

Regulations of the Canadian Department of Communications. Le present

appareil numerique n'emet pas de bruits radioelectriques depassant les limites

applicables aux appareils numeriques de la class B prescrites dans le Reglement

sur le brouillage radioelectrique edicte par le ministere des Communications du

Canada.

Product Disposal

Do not dispose of the printer or supplies in the same manner as normal house-

hold waste. Consult your local authorities for disposal and recycling options.

Battery Notice

This product contains Perchlorate material. Special handling may apply.

For more information, go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

CAUTION!

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT

TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE EXTERIOR PANELS. NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

OPERATE THE UNIT WITH ONLY THE PROPER ELECTRICAL SPECIFICA-

TIONS AS LABELED ON THE PRINTER AND AC ADAPTER.

CAUTION!

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT

TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE

INSTRUCTIONS.

Radiation Exposure Statement

WARNING:

This equipment complies with International Commission on Non-Ionizing

Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications

Commission Office of Engineering and Technology (OET) Bulletin 65, Canada

RSS-102, and CENELEC limits for exposure to radio frequency (RF) radiation.

Use of antennas and accessories not authorized may void the compliance of this

product and may result in RF exposures beyond the limits established for this

equipment.

When installing and using this product, a 20-cm passing distance must be main-

tained from the body or head of the user or nearby persons and the antenna.

The antenna must not be touched during transmitter operation.

RX900.qxd 2/17/2011 1:33 PM Page 61

TOC

INDEX

Advertising