Pitney Bowes ADDRESSRIGHT DA400 - Manual (Page 24)

2-7
Setup
5. Connecting the Power Cord and Turn ON
A. Make sure that the power switch is turned OFF (0),
then connect the power cord to the printer.
Assembling
the Printer
(continued)
B. Plug the power cord into a grounded outlet. Please
review the safety information on pages 1-5 and 1-6.
Once you've connected the cable, press the print er’s
power switch to the “I” (ON) po si tion. The switch is located
next to the power cord re cep ta cle.
When you turn the printer on. The LCD menu displays that
the printer is initializing. After a few seconds, the printer will
automatically go "ON LINE".
You can tell if the printer is ON LINE, by looking at the
green indicator light above the ON LINE key. When the
printer is ON LINE, the indicator will be lit.
6. Installing the Print Cartridge(s)
The printer uses Print Cartridges which you must install
before you can print. Follow the instructions in Chapter
5—Maintenance to install the new cartridges.
Power cord and USB Cable
Attached Power Cord and Parallel Cable
Attached
SV61186ABook.indb 2-7 3/29/2004, 1:44:50 PM