Pitney Bowes ADDRESSRIGHT DA400 - Manual (Page 87)

A-26
Printer Menus
10. Feed Gap
Two settings are available to modify how the printer
reacts. Use this option to help when feeding very glossy
media or short media.
A. Selectable Gap
This item increases the gap or space between pieces of
media as they are fed through the printer. Increasing the
gap will slightly reduce the overall throughput of the print-
er. This item can be set from 3" (76mm) to 12.8" (322mm).
B. Stream Feed
This option gives the each record a fixed time before
printing on the next piece. This option is best used to print
small records of three or less lines of text.
Enabling this option will disable the ‘Selectable Gap’ set-
ting above.
For instructions how to use the menus and select an op-
tion, refer to page A-4.
11. ROM Revision
This option is extremely useful whenever it is necessary
to verify the Firmware Revision installed in the printer. It is
also useful to determine if your printer requires an up-
grade.
The Maintenance Count, which is the total number of print
cycles accumulated, is also displayed. This information is
helpful in determining solutions to printer problems.
If you press the Test button when ROM REV. is displayed
on the LCD, a list of the Main Menu and Setup Menu set-
tings is printed on four pieces of media.
For instructions how to use the menus and select an op-
tion, refer to page A-4.
Using the
Setup Menu
(continued)
SV61186ABook.indb A-26 3/29/2004, 1:45:17 PM