Pitney Bowes ADDRESSRIGHT DA400 - Manual (Page 75)

A-14
Printer Menus
8. Conveyor Type
This menu item provides you with two selections: W980
Stacker and Other. The "Other" setting can only used if
the model of conveyor stacker being used supports this
function. This item increases the length of time the stacker
will stay on. It can be set from 0.00 to 2.00 seconds.
Generally, when the print quality is set higher than draft,
and/or, print width is larger than normal, the drying time
of printed records must be increased to prevent smear-
ing or smudging of addresses. Changing the time that the
conveyor remains on alters how the media is shingled on
the conveyor.
Special consideration of ink drying time and media han-
dling for glossy or Tyvek media should also be considered
when using a conveyer.
9. Image Overlay
This menu item is used in conjunction with the Overlay
Printer Driver. Use this option to print ‘static’ text or graph-
ics in the same location on every piece. The Image Over-
lay option is best used for printing a company logo and
return address.
A. First Image Overlay
This option saves the very first record or graphic received
into the printers’ memory as an overlay.
B. Clear Overlay
This option clears the overlay data in the printer’s memo-
ry.
C. Print Overlay First
This option prints the data sent for the overlay onto the
first piece. Use this piece to verify the location of the over-
lay is correct.
For instructions how to use the menus and select an op-
tion, refer to page A-4.
Using the
Main Menu
(continued)
SV61186ABook.indb A-14 3/29/2004, 1:45:13 PM