Pitney Bowes ADDRESSRIGHT DA400 - Manual (Page 79)

A-18
Printer Menus
1. Stop On Feed Err (Error)
Use this option to stop the printer from feeding more
media when an error occurs. Otherwise the printer will
continuously feed media until the record is accurately
printed before continuing onto the next record. Stopping
the printer when an error occurs is helpful when the media
is in short supply.
For instructions how to use the menus and select an op-
tion, refer to page A-4.
2. Feeder Signal
A. None
This option disables the feeder signal.
B. On/Off Control
This option turns a signal on whenever one or more re-
cords are in the buffer to be printed. The signal is turned
off once the last record in the buffer is being printed. The
signal will also turn off when an "Early Feed Error" occurs
while the Stop On Feed Error option is enabled.
C. Pulse Off Control
This option turns on a signal when:
• the sensor detects the leading edge of the envelope for
the last address to be printed at the print heads or
• when an early feed error is detected (if the Stop On
Feed Error option has been selected).
In either case, the signal will be cleared one second later.
D. On/Quick Off
This option turns on a signal whenver one or more
reocrds are in the buffer to be printed. The signal is turned
off once the sensor detets the piece to print the last record
of the buffer on.
Using the
Setup Menu
(continued)
SV61186ABook.indb A-18 3/29/2004, 1:45:15 PM