Polycom 1 User Manual
Page 127
Statistics and Diagnostics
11 - 9
Call Direction
In — For calls received.
Out — For calls placed from the system.
Conference ID
A number given to each conference. A conference can
include more than one far site, so there may be more than
one row with the same conference ID.
Call ID
Identifies individual calls within the same conference.
Total H.320
Channels Used
The total number of ISDN B channels used in the call. For
example, a 384K call would use six B channels.
Endpoint Alias
The alias of the far site.
Endpoint Additional
Alias
An additional alias of the far site.
Endpoint Type
Terminal, gateway, or MCU.
Endpoint Transport
Address
The actual address of the far site (not necessarily the
address dialed).
Audio Protocol (Tx)
The audio protocol transmitted to the far site, such as G.728
or G.722.1.
Audio Protocol (Rx)
The audio protocol received from the far site, such as G.728
or G.722.
Video Protocol (Tx)
The video protocol transmitted to the far site, such as H.263
or H.264.
Video Protocol (Rx)
The video protocol received from the far site, such as H.261
or H.263.
Video Format (Tx)
The video format transmitted to the far site, such as CIF or
SIF.
Video Format (Rx)
The video format received from the far site, such as CIF or
SIF.
Disconnect Reason
The description of the Q.850 (ISDN) cause code showing
how the call ended.
Q.850 Cause Code
The Q.850 cause code showing how the call ended.
Total H.320 Errors
The number of errors during an H.320 call.
Average Percent of
Packet Loss (Tx)
The combined average of the percentage of both audio and
video packets transmitted that were lost during the 5
seconds preceding the moment at which a sample was
taken. This value does not report a cumulative average for
the entire H.323 call. However, it does report an average of
the sampled values.
Data
Description