Polycom 1 User Manual
Page 13
Introducing the Polycom HDX Systems
1 - 3
To power off the Polycom HDX system:
¾
Press and hold the
power button on the remote control for 2 seconds.
¾
Press and hold the power switch on the front of the system for 2 seconds.
The following figure shows the location of the power switch and indicator
light.
The indicator light on the front of the system provides this information:
Indicator Light
System Status
Off
System is powered off
Steady green light
System is initializing
System is awake and not in a call
Blinking green light (once)
System received an IR signal while
awake and not in a call
Blinking green light (on 1 sec, off 2 sec)
System is asleep, not in a call
Steady amber light
System is in a call
Blinking amber light (once)
System received an IR signal while in
a call
Blinking amber light
System is in software update mode
System is in factory restore mode
Rapidly blinking amber light
System is preparing to reset its
configuration