Pioneer VSX-D909S - Manual (Page 22)

22
Front Panel
All the controls on the front panel are explained and/or referenced here. To open the front panel push
gently on the lower third of the panel.
1 STANDBY/ON button
Press to switch the receiver ON or into
STANDBY mode.
STANDBY indicator
Lights when the receiver is in STANDBY mode.
(Please note that this receiver consumes a
small amount of power [1.0 W] in the standby
mode.)
2 DSP MODE button (See p.43 & 44)
Press repeatedly to select a DSP sound mode.
(HALL 1, HALL 2, JAZZ, DANCE, THEATER 1,
or THEATER 2, 5/7CH STEREO). Use these
modes to produce surround sound from
standard (two channel) stereo sources and
create different listening environments.
STEREO/DIRECT button (See p.43 & 52)
Switches the receiver into STEREO mode if it
was in a different sound mode (like DSP mode)
or toggles between DIRECT and STEREO
mode. For more on STEREO mode see p.52
DIRECT playback bypasses the tone controls,
DIGITAL NR, LOUDNESS, MIDNIGHT and
channel level for the most accurate
reproduction of a program source.
SIGNAL SELECT button (See p.47)
Use to select the type of signal being input into
the receiver. Press SIGNAL SELECT repeatedly
to select one of the following:
ANALOG – To select an analog signal.
DIGITAL – To select a optical or coaxial digital
signal.
AUTO – This is the default. If there are analog
and digital signals input, the receiver
automatically selects the digital signal.
/ DTS buttons (See p.41-45, 83, 84)
ADVANCED – Use to select one of the four
Advanced Theater modes. Use to create certain
types of sound environments when listening to
Dolby Digital, Dolby Pro Logic or DTS sources.
STANDARD – Use for pure decoding of multi
channel sources, especially Dolby Digital, Dolby
Pro Logic or DTS sources. Each press toggles
between STANDARD and STANDARD 7.1
mode (for use with SURROUND BACK
speakers). Those with surround back speakers
can use two STANDARD modes, those without
can only use the STANDARD mode.
STANDBY/ON DSP
MODE
MULTI-ROOM
&SOURCE
INPUT
SELECTOR
MASTER
VOLUME
SIGNAL SELECT ADVANCED STANDARD CONTROL
STANDBY
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
STEREO/
DIRECT
/DTS
DOWN UP
Digital Signal Processor VSX-D909S
PHONES
S-VIDEO VIDEO
MULTI CH
INPUT
FL
DIMMER
TAPE 2
MONITOR
TONE
CHANNEL
SELECT LOUDNESS
DIGITAL
NR CLASS BAND
TUNER CONTROL
MEMORY MPX
VIDEO
SELECT SPEAKERS
- TUNING +
- STATION + - TREBLE + - BASS +
L AUDIO R
VIDEO INPUT
1 2 5 3 6 7 8 9
10 11 12 13 14 15 16
4
Displays & Controls