Pioneer VSX-D909S - Manual (Page 52)

52
Adjusting the Brightness of the Display
Use the FL DIMMER button to adjust the brightness of the fluorescent display (FL=fluorescent display).
Press the FL DIMMER button.
Four levels of brightness ranging from very dim to very bright can
be selected. Each press changes the brightness of the display.
When rotating through the options, the default brightness can also
be selected.
Please note: it is a feature of this unit that the fluorescent
display will be brighter for a few seconds after you choose a
function (like DVD/LD, CD, etc.) and then get softer. This will
still happen when you adjust the brightness but the new setting
will be the one the display softens to.
memo
Direct Playback
1 Put the remote control slide switch in USE.
2 Use the STEREO/DIRECT button to alternate
between STEREO or DIRECT mode (you can
also use the STEREO/DIRECT button on the
front panel).
The DIRECT mode will give you the most accurate reproduction of
two channel (stereo) sources but won't let you add any effects to
the sound.
• None of the tone controls or other sound modes can be
used with DIRECT playback.
• If the receiver is in a different mode than STEREO to start
with the first push of the STEREO button will put it in
STEREO mode. After that the button will toggle the receiver
between STEREO and DIRECT mode.
• For more on this button see the explanation of STEREO
mode on p.43, 44, 46.
memo
STANDBY/ON DSP MODE MULTI-ROOM &SOURCE INPUT SELECTOR
MASTER VOLUME
SIGNAL SELECT CONTROL
STANDBY
AUDIO/VIDEO MULTI-CHANNEL RECEIVER Digital Signal Processor
STEREO/ DIRECT
ADVANCED STANDARD /DTS
VSX-D909S
PHONES S-VIDEO VIDEO
MULTI CH INPUT FL DIMMER
TAPE 2 MONITOR
TONE CHANNEL SELECT LOUDNESS DIGITAL NR CLASS BAND
TUNER CONTROL MEMORY MPX VIDEO
SELCT SPEAKERS
- TUNING +
- STATION + - TREBLE + - BASS +
L AUDIO R VIDEO INPUT
DOWN UP
FL DIMMER
STANDBY/ON DSP MODE MULTI-ROOM &SOURCE INPUT SELECTOR
MASTER VOLUME
SIGNAL SELECT CONTROL
STANDBY
AUDIO/VIDEO MULTI-CHANNEL RECEIVER Digital Signal Processor
STEREO/ DIRECT
ADVANCED STANDARD /DTS
VSX-D909S
PHONES S-VIDEO VIDEO
MULTI CH INPUT FL DIMMER
TAPE 2 MONITOR
TONE CHANNEL SELECT LOUDNESS DIGITAL NR CLASS BAND
TUNER CONTROL MEMORY MPX VIDEO
SELCT SPEAKERS
- TUNING +
- STATION + - TREBLE + - BASS +
L AUDIO R VIDEO INPUT
DOWN UP
STEREO/
DIRECT
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD MD/
TAPE1 TUNER TVCONT
RECEIVER
USE SETUP
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
BAND
SYSTEM
OFF
1 2 3
Î
¶ 8 7 3
1 ¡ 4 ¢
+ -
+ -
+ -
MULTI CONTROL
1
DTV ON/OFF DTV MENU
TUNING
This mode is for playing back a sound source in its purest form, no tone adjustments or other sound modes can
be used.
Basic Playback
dB
STEREO SIGNAL
SELECT
ANALOG SP
A
VOLUME
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
ENTER
STEREO/
DIRECT DSP
LIGHT
FUNCTION
SYSTEM SETUP
MIDNIGHT MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/ CH SEL
SIGNAL SELECT
+
–
2
ADVANCED
/DTS