Pioneer VSX-D909S - Manual (Page 41)

OPERA
TION
OPERA
TION
41
Basic Playback
Sound Modes
The four sound modes on the receiver are explained here. These can be turned on from the front panel or from
the remote control.
There are two cinema modes: STANDARD, and ADVANCED THEATER. These are designed to be used with
multi channel surround sound audio/visual sources (like DVDs and LDs). Intrinsic to home theater, these modes
can deliver realistic and powerful surround sound that recreates the movie theater experience. You may need to
experiment with them to see which settings suit your home system and personal tastes.
The DSP and STEREO modes are designed to be used with music sources but some DSP modes are also suited
for film soundtracks. Again, try different settings with various soundtracks to see which you like.
You must choose one of the three cinema modes or the DSP mode in order to get surround sound. In STEREO
mode only the front two speakers, and sometimes the subwoofer (if you have one), are used.
STANDARD modes
STANDARD mode decodes Dolby Digital, DTS and Dolby Pro Logic sources (see page 83 for more detailed
information), and plays them without any further processing. You can think of this as the basic surround sound
mode of the receiver.
Using STANDARD 7.1 you can enjoy surround sound from additional surround back speaker(s). You will only be
able to access STANDARD 7.1 if you have hooked up SURROUND BACK speaker(s). For more detailed
information see p.19, 32-33.
STANDARD
This mode decodes Dolby Digital, DTS or Dolby Pro Logic sources with no additional effects. If you don't
have SURROUND BACK speaker(s) switched on (see p.32-33) this is the only STANDARD mode you will
be able to select on the receiver.
STANDARD 7.1
STANDARD 7.1 is a Pioneer technology that generates realistic 7 channel surround sound without
destroying the original sound staging. You will only be able to access this mode if you have set the
SURROUND BACK speakers in the SPEAKER SETUP procedure (see p.32-33). Also, this mode will play 5.1
channels sources and other sources through all the speakers you have hooked up, routing some of the
sound into your SURROUND BACK channel or channels. STANDARD 7.1 will appear in the display even if
you only have one SURROUND BACK speaker hooked up.