Pioneer VSX-D909S - Manual (Page 80)

80
Using the front panel with the MULTI-ROOM system
1 Press the MULTI-ROOM & SOURCE
button.
The display shown below will illuminate when the
receiver is in STANDBY mode.
Also, the MR&S button will light.
2 Press the CONTROL button.
The light will start to blink.
3 Within ten seconds of step 2, select
the FUNCTION with the INPUT
SELECTOR.
For this example we'll use the TUNER function. The
display shown below will illuminate.
The INPUT SELECTOR steps through the functions in
the following order:
4 Press the CONTROL button again
and use the INPUT SELECTOR to
adjust the VOLUME. The volume
can be adjusted in a range of -82dB
to 0dB.
The display will appear as shown below.
5 When in TUNER function, press the
CONTROL button and use the
INPUT SELECTOR to tune in the
station.
The display will appear as shown below.
Turn the input selector until you get:
TUNER MD/TAPE 1 VCR 1
TV/SAT DVD/LD CD
MULTI-ROOM
&SOURCE
INPUT
SELECTOR
MASTER VOLUME
DOWN UP
OL
TUNING +
STATION +
CONTROL
1
2,4,5 3,4,5
MULTI-ROOM
&SOURCE
CONTROL
«
Using Other Functions
«
If you don't turn the multi room
function off you won't be able to turn
the entire main room system off.
memo