Learning commands from other remote controls, 1 set the remote control slide switch to setup, 2 press the remote setup button – Pioneer VSX-D909S User Manual
Page 60: 3 press the remote setup button and, At the same time to select the learning setup mode, Remote control of other components, The remote set up menu appears on your tv screen
60
Learning Commands from Other Remote Controls
If preset codes are not available for your component(s), or the available preset codes do not operate correctly,
you can use this function to program in signals from the remote control(s) of your other component(s). This
operation can also be used after recalling a preset code to program additional operations not covered in the
preset codes.
1 Set the remote control slide switch to
SETUP.
Also make sure that your TV is on and set to the receiver.
2 Press the REMOTE SETUP button.
The REMOTE SET UP menu appears on your TV screen.
Select Remote
Setup Mode
Remote SETUP+1
Preset Recall
Remote SETUP+2
Learning
Remote SETUP+3
Multi-Operation
Remote SETUP+4
Direct Function
3 Press the REMOTE SETUP button and
2
at
the same time to select the Learning setup
mode.
All the MULTI CONTROL buttons (except the TUNER button)
start to blink.
To cancel Learning setup mode, press the REMOTE SET UP
button.
Learning Setup
1
Place both commanders
pointing at each other.
2
Select the item from
the Multi-control
buttons that should be
duplicated. (ex. DVD)
Multi-control button
starts blinking.
EXIT
=
Remote Setup
4 Press the MULTI CONTROL button for the
component you want to control.
Each button can be set to control one of the following
components.
The selected button continues to blink.
Learning Setup
3
Press one button that
should be duplicated.
4
Multi-Contorol button
lights up.
5
Press one button on the
original commander, and
hold 2 to 10 seconds.
6
Repeat this process to
duplicate next command.
EXIT
=
Remote Setup
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
S0URCE
DVD/LD
TV/SAT
VCR1
VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO/
DIRECT
DSP
LIGHT
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TVCONT
RECEIVER
USE
SETUP
MULTI
OPERATION
CLASS
MPX
DIRECT ACCESS
CHANNEL
STATION
TV CONTROL
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
MIDNIGHT
MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/
CH SEL
SIGNAL
SELECT
BAND
SYSTEM
OFF
1
2
3
4
5
6
7
8
9
0
Î
¶
8
7
3
1
¡
4
¢
+
-
+
-
+
-
MULTI CONTROL
+
+
–
–
+
–
1
3
2,3
4
ADVANCED
DISC
EXIT
+10
GUIDE
ENTER
DTV ON/OFF
DTV MENU
TUNING
/DTS
Remote Control of Other Components