Planar PD7170 - Manual (Page 25)

Controls and Functions
Planar PD7170 Installation/Operation Manual 11
PREL
IMINA
RY
8. Picture Adjustment Buttons:
Contrast
Press to adjust white level.
Brightness
Press to adjust black level.
Sharpness (SHARP)
Press to adjust sharpness.
Gamma (GAMMA)
Press to select a gamma curve.
Overscan (OS)
Press to select an overscan mode.
Noise Reduction (NR)
Press to adjust noise reduction level.
9. LIGHT
Press momentarily to activate remote backlighting. Press and hold for
5 to 7 seconds to illuminate the projector rear panel, to facilitate
connecting cables in a dark room.
10. Picture-In-Picture (PIP) Controls:
PIP
Press repeatedly to activate/deactivate PIP mode or select the desired PIP
image source.
SWAP
Press to swap the PIP image with the active source image.