2 quick setup, Table 3-1 . installation overview, Quick setup – Planar PD7170 User Manual
Page 29: Prel imina ry
Planar PD7170 Installation/Operation Manual
15
PREL
IMINA
RY
3.2
Quick Setup
Table 3-1 gives a quick overview of the PD7170 installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom
video installation specialist.
Table 3-1. Installation Overview
Step
Procedure
For Details, Refer to
page...
1
Choose a location for the projector
2
Install the projection lens (if standard lens will not be
used)
3
Mount the projector
4
Connect signal sources to the PD7170
5
Connect external controller to RS-232 port and/or IR
repeater system (optional)
6
Connect 12-volt trigger output to retractable screen
or other, +12V trigger-activated equipment
(optional)
7
Apply power to the projector
8
Primary lens adjustments: projected image size
(zoom), position (shift) and focus
9
Change the OSD Language (optional)
10
For rear-screen and/or ceiling-mount installations,
select the proper picture orientation
11
Projector calibration: adjust the following for each
input; save settings when finished:
Aspect ratio
Brightness
Contrast
Color level
Tint
Input position
Note