Pioneer PRO-950HD - Manual (Page 59)

59
En
Adjustments and Settings 11
Sound Effect
You can select from SRS FOCUS, SRS or SRS TruBass.
1 Press HOME MENU.
2 Select “Sound” ( / then ENTER).
3 Select “Sound Effect” ( / then ENTER).
4 Select “SRS FOCUS”, “SRS” or “SRS TruBass” ( / ).
5 Select the desired parameter ( / ).
6 Press HOME MENU to exit the menu.
Note
• (WOW) denotes a status where SRS FOCUS ® ,
SRS ® and SRS TruBass ® are on.
• You cannot adjust the sound effect for listening with
headphones.
• If you change the sound effect with headphones connected,
the new setting will become effective as soon as you
disconnect the headphones.
• The effect of this function differs depending on signals.
Power Control
Power Control provides convenient functions for saving power.
Energy Save
You may use one of the three Energy Save modes to save power
consumption.
1 Press HOME MENU.
2 Select “Power Control” ( / then ENTER).
3 Select “Energy Save” ( / then ENTER).
4 Select “Mode 1”, “Mode 2”, or “Picture Off” ( / then
ENTER).
5 Press HOME MENU to exit the menu.
Note
• When you change the Energy Save mode, you may notice a
change in the panel sound. This is normal.
• Energy Save maintains efficiency of the screen for a long
period of time by decreasing picture brightness and lowering
power consumption. Setting Energy Save to “Mode 1” is
recommended for increased efficiency.
No Signal off (AV source only)
The system will be automatically placed into the standby mode if
no signal is received for 15 minutes.
1 Press HOME MENU.
2 Select “Power Control” ( / then ENTER).
3 Select “No Signal off” ( / then ENTER).
4 Select “Enable” ( / then ENTER).
5 Press HOME MENU to exit the menu.
Note
• Five minutes before the system is placed into the standby
mode, a message appears every minute.
• The system may not be placed into the standby mode when
noise signals are present at the plasma display after a TV
program finishes.
SRS FOCUS
Selections Off Deactivates SRS FOCUS ®
On Activates SRS FOCUS ®
Shifts the apparent direction of the sound
upward for more clearly defined sound
SRS
Selections Off Deactivates SRS ®
On Activates SRS ®
Reproduces highly effective
three-dimensional sound
SRS TruBass
Selections Off Deactivates SRS TruBass ®
On Activates SRS TruBass ®
Provides deep, rich bass using a new
technology
Item Description
Off Does not decrease picture brightness
Mode 1 Slightly lowers power consumption while slightly
suppressing the brightness drop level
Mode 2 Decreases the picture brightness and lowers power
consumption
Picture Off Deactivates the screen to save power. To restore the
screen display, press any button other than
VOL +/–
and MUTING.
This setting is not memorized by the system.
Item Description
Disable
(default) Does not place the system into the standby mode
Enable Places the system into the standby mode if no signal
is received for 15 minutes
PRO1150HD.book Page 59 Tuesday, April 17, 2007 9:34 AM