Panduit TDP46H - Manual (Page 17)

PANDUIT TDP4*H GMTDPH-MAN Page 2-5
Section 2: Installation
Loading Labels and Tags
1. Open the Top Access Door by swinging it up and to
the left. Open the Side Access Door by swinging it to
the rear of the printer
2. Open the Print Head Assembly by pushing the Head
Latch toward the rear of the printer. The Print Head
assembly is spring-loaded and will automatically open
as soon as the Head Latch is disengaged.
3. Loosen the Label Edge Guide and push it to the
outside of the printer to give the maximum label width.
4. Remove the Label Roll Retainer
Top Access Door
Side
Access Door
Label Roll Retainer
Print Head
Head Latch
Sensor Assembly
Label Hold Down
Label
Guide
Label Edge Guide