Panduit TDP46H - Manual (Page 37)

PANDUIT TDP4*H GMTDPH-MAN Page 3-11
Section 3: Configuration
Press the LINE key once. When the display changes to
OFFLINE, press the FEED and LINE keys simultaneously for
more than one second. Release the keys.
The LCD now displays the Print Darkness selections. The
current setting is indicated by a cursor over one of the range
settings. There are 5 possible selections. The lowest setting
represents the lightest print and the highest setting the darkest
print.
1. Press the Cursor keys to step the cursor to the desired
setting.
2. Once the correct setting is underlined, press the ENTER
key to accept the selection and step the display to the next
adjustment.
The print speed selections are dependent upon the printer
model. The current setting is indicated by the cursor.
1. Use the Cursor keys to step the cursor to the desired
setting.
2. Once the correct setting is selected, press the ENTER key
to accept the selection and step the display to the next
adjustment.
OFFLINE
000000
PRINT DARKNESS
1 2 3 4 5
PRINT SPEED
2 4 6 8 10