Configuring a wndap330 as a point-to-point bridge, Figure 4-7 – NETGEAR ProSafe WNDAP330 User Manual
Page 106
Advertising
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
4-14
Advanced Configuration
v1.0, May 2008
Configuring a WNDAP330 as a Point-to-Point Bridge
To configure a point-to-point bridge as shown in
1. Under the Configuration tab, select Wireless Bridge on the main menu. Then, select Bridging
and Repeating. The Bridging and Repeating screen will display.
2. Configure the WNDAP330 (AP1) on LAN Segment 1 in Point-to-Point Bridge mode.
Figure 4-7
Advertising