Restoring the configuration, Restoring the configuration -9 – NETGEAR ProSafe WNDAP330 User Manual
Page 79
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Management
3-9
v1.0, May 2008
Restoring the Configuration
To restore your settings from a saved configuration file:
1. Enter the full path to the file on your computer or click the Browse button to locate the file.
2. When you have located the file, click Restore to upload the file. After completing the upload,
the WNDAP330 will reboot automatically.
Restoring the WNDAP330 to the Factory Default Settings
It is sometimes desirable to restore the wireless access point to the factory default settings. This
can be done by using the Restore function, which restores all factory settings.
To access this function:
1. Under the Maintenance tab, select Reset from the main menu, and then select Restore Defaults
from the left-hand menu. The Restore Defaults screen will display, as shown in
Figure 3-7