NETGEAR ProSafe WNDAP330 - Manual (Page 135)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Command Line Reference C-13
v1.0, May 2008
| |-time> --time Setting
| | |-custom-ntp-server --custom NTP server host name
| | |-daylightsaving --daylight saving
| | |-ntp-client --NTP client host name
| | |-ntp-server --NTP server host name
| | |-time-zone --time zone
| |
| |-vlan> --vlan settings
| | |-management-vlan --vlan management id
| | |-untagged-vlan --untagged vlan id
| | |-untagged-vlan-status --untagged vlan status
| |
|
|-exit --logout from CLI
|-file --
|-firmware-upgrade --upload new system firmware file
|-password --system password
|-restore-configuration --restore system configuration
|-restore-default-password --restore default system password
|-show> --show system settings
| |-configuration --show system configuration
| |-interface> --show wireless lan interface
| | |-eth> --ethernet interface
| | | |-statistics --show ethernet statistics
| | |
| | |-wlan> --wlan interface settings
| | | |-2.4GHz> --2.4GHz wlan interface settings
| | | | |-configuration --interface configuration
| | | | |-knownaplist --known access point list
| | | | |-stationlist --station list
| | | | |-statistics --interface statistics
| | | | |-trusted-stationlist --trusted station list
| | | | |-unknownaplist --unknown access point list
| | | |
| | | |-5GHz> --5GHz wlan interface settings
| | | | |-configuration --interface configuration
| | | | |-knownaplist --known access point list
| | | | |-stationlist --station list
| | | | |-statistics --interface statistics
| | | | |-trusted-stationlist --trusted station list
| | | | |-unknownaplist --unknown access point list
| | | |
| | |
| |
| |-log --system log
| |-system --system setting