NETGEAR ProSafe WNDAP330 User Manual
Page 69
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Basic Installation and Configuration
2-43
v1.0, May 2008
3. Check the Turn Access Control On radio box to enable Access Control feature.
4. Select the desired Access Control Database options. The options are:
•
Local MAC Address Database – The Access Point will use the local MAC address table
for Access Control. This is the default.
•
RADIUS MAC Address Database – The Access Point will use the MAC address table
located on the external RADIUS server on the LAN for Access Control. If you choose this
database, you must configure the RADIUS Server Settings first (see
RADIUS Server Settings” on page 2-30
5. The Trusted Wireless Stations list shows any wireless stations you have entered. If you have
not entered any wireless stations this list will be empty. To delete an existing entry, select it
and then click Delete.
6. Click Refresh to refresh the Available Wireless Stations list found in your area.
7. Select the stations from the list of Available Wireless Stations found in your area, or enter the
MAC address of a station to add a new station manually. (You can usually find the MAC
address printed on the bottom of the wireless adapter.)
Figure 2-24