Linking and joining calls, Joining a call on hold, Linking and – Nortel Networks Attendant Console User Manual
Page 60: Linking and joining, Linking and joining calls” on, R to
60 Chapter 4 Handling calls
P0936572 02
Linking and Joining calls
Using Attendant Console, you can create conference calls linking or joining calls. Use the DTMF
button to transfer or link calls on Centrex lines.
To use the DTMF button with an incoming call on a Loop button
1
On the toolbar click
.
The active incoming call is placed on hold.
2
In the Target list box type an outside telephone number.
3
On the toolbar click
.
The number in the Target list box is dialed out with DTMF tones on the same CO line on
which the active incoming call arrived.
4
Click the Release button and the incoming call transfers to the outside telephone number
(using the telephone company’s Centrex capability). The Attendant disconnects from the call
and the Loop button becomes idle.
Joining a call on hold
To join a call on a hold on a Loop button with an active call on a
Loop button
1
On the toolbar click
.
2
Drag the “Join” cursor to the Loop button on which the call is held.
3
Click the Loop button holding the call.
The two callers connect, the Attendant releases from the active call and both Loop buttons
become idle.