NEC DLP CINEMA NC1600C User Manual
Page 16
1. What’s in the Box? and the Names of the Projector Parts
16
Using the remote control cable
Use the remote control cable when there are objects that interrupt or obstruct the space between the remote control reception
unit on the projector and the remote control, or when you are using the remote control beyond its effective range.
Note that the remote control cable is connected first to the remote control, then to the projector head.
SDI-A
SDI-B
DVI-A
DVI-B
REMOTE
IN
RS-232C
PC CARD
USB
CINEMA
SYSTEM
Notes for use of the remote control
• Do not drop or handle the remote control in a careless manner.
• Do not allow the remote control to be splashed with water or any other liquid. If the remote control should get wet accidentally,
wipe the liquid off immediately.
• Be sure to use the remote control in a place free from heat or dampness as far as is practicable.
• The remote cable is connected first to the remote control, then to the projector head. The leading end of the remote cable is
the power supply unit, so be careful not to touch the other end of the remote cable to the projector head or other devices
while only the remote cable is connected to the projector.