NEC DLP CINEMA NC1600C - Manual (Page 41)

41
6. Appendix
6-2. Indicator display list
See the descriptions below when the blinking or lighting of the two indicators on the projector’s control panel and the rear
STATUS indicator on the backside of the projector is observed. The projector also has a warning function that uses a buzzer.
MMS
STATUS
MMS STATUS indicator
POWER indicator
STATUS indicator
6-2-1. POWER indicator
Indicator condition
Off
Blinking light
Steady light
Projector condition
The main power is off.
The projector is getting ready to turn on.
The douser is closed.
The projector is cooling down.
The projector is turned on.
The projector is in standby.
Note
-
Wait for a moment.
Wait for a moment.
-
-
Green
Orange
Green
Orange
6-2-2. STATUS indicator
Indicator condition
Off
Blinking light (Red)
Projector condition
Normal
Error
Note
-
An error message is displayed in
the LCD screen. Check the content
of the error.
6-2-3. MMS STATUS indicator
Indicator condition
Off
Blinking light
Steady light
Projector condition
Multi-media switcher (MMS) not in use.
Link error
Preparing link with Built-in multi-media
switcher (MMS).
Preparing link with External multi-media
switcher (MMS).
Built-in multi-media switcher (MMS) is linked.
External multi-media switcher (MMS) is linked.
Note
-
Link error. An error message is
displayed in the LCD screen.
Check the content of the error.
Wait for a moment.
Wait for a moment.
-
-
Red
Green
Orange
Green
Orange