NETGEAR ProSafe FVS124G - Manual (Page 143)

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
Router and Network Management 8-9
202-10085-01, March 2005
Enabling Remote Management Access
Using the Remote Management page, you can allow an administrator on the Internet to configure,
upgrade, and check the status of your FVS124G VPN Firewall. You must be logged in locally to
enable remote management (see
“Step 2: Log in to the VPN Firewall (Required)” on page 4-7 ).
Figure 8-2 shows the Remote Management screen that is invoked by clicking Remote
Management under Management on the Main Menu bar.
Figure 8-2: Remote Management screen
To configure your firewall for Remote Management:
1. Select the Turn Remote Management On check box.
2. Specify what external addresses will be allowed to access the firewall’s remote management.
Note: For enhanced security, restrict access to as few external IP addresses as practical.
Note: Be sure to change the firewall's default configuration password to a very secure
password. The ideal password should contain no dictionary words from any language,
and should be a mixture of letters (both upper and lower case), numbers, and symbols.
Your password can be up to 30 characters. See
“Changing the Passwords and Login
Timeout” on page 8-8 for the procedure on how to do this.