NETGEAR ProSafe FVS124G - Manual (Page 161)

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
Router and Network Management 8-27
202-10085-01, March 2005
SNMP
SNMP lets you monitor and manage log resources from an SNMP-compliant system manager.
SNMP system configuration lets you change the system variables for MIB2.
Figure 8-16: SNMP Configuration screens
Diagnostics
You can perform diagnostics such as pinging an IP address, perform a DNS lookup, display the
routing table, reboot the firewall, and capture packets.
Note: For normal operation, diagnostics are not required.
State The current status of the SA.Phase 1 is Authentication phase and Phase 2 is Key
Exchange phase.
Action Use this button to terminate/build the SA (connection) if required.
Table 8-1. VPN Status data
Item Description