Extensive protocol support, Easy installation and management, Extensive protocol support -4 – NETGEAR ProSafe FVS124G User Manual

Page 22: Easy installation and management -4

Advertising
background image

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports

2-4

Introduction

202-10085-01, March 2005

Extensive Protocol Support

The FVS124G VPN Firewall supports the Transmission Control Protocol/Internet Protocol (TCP/
IP) and Routing Information Protocol (RIP). For further information about TCP/IP, refer to

Appendix B, “Network, Routing, Firewall, and Basics

.”

IP Address Sharing by NAT

The FVS124G VPN Firewall allows several networked PCs to share an Internet account using
only a single IP address, which may be statically or dynamically assigned by your Internet
service provider (ISP). This technique, known as NAT, allows the use of an inexpensive
single-user ISP account.

Automatic Configuration of Attached PCs by DHCP

The FVS124G VPN Firewall dynamically assigns network configuration information,
including IP, gateway, and domain name server (DNS) addresses, to attached PCs on the LAN
using the Dynamic Host Configuration Protocol (DHCP). This feature greatly simplifies
configuration of PCs on your local network.

DNS Proxy

When DHCP is enabled and no DNS addresses are specified, the firewall provides its own
address as a DNS server to the attached PCs. The firewall obtains actual DNS addresses from
the ISP during connection setup and forwards DNS requests from the LAN.

PPP over Ethernet (PPPoE)

PPPoE is a protocol for connecting remote hosts to the Internet over a DSL connection by
simulating a dial-up connection. This feature eliminates the need to run a login program such
as EnterNet or WinPOET on your PC.

Easy Installation and Management

You can install, configure, and operate the FVS124G ProSafe VPN Firewall 25 with 4 Gigabit
LAN and Dual WAN Ports within minutes after connecting it to the network. The following
features simplify installation and management tasks:

Browser-based management

Browser-based configuration allows you to easily configure your firewall from almost any
type of personal computer, such as Windows, Macintosh, or Linux. A user-friendly Setup
Wizard is provided and online help documentation is built into the browser-based Web
Management Interface.

Smart Wizard

The FVS124G VPN Firewall automatically senses the type of Internet connection, asking you
only for the information required for your type of ISP account.

Advertising