NETGEAR ProSafe FVS124G - Manual (Page 74)

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
5-6 LAN Configuration
202-10085-01, March 2005
Multi Home LAN IPs
Click Multi Home LAN IPs Setup on the LAN IP Setup screen (see Figure 5-1 ) to invoke the
Secondary LAN IP Setup screens. This allows the firewall to act as a gateway to additional logical
subnets on your LAN. You can assign the firewall an IP address on each additional logical subnet.
Figure 5-3: Secondary LAN IP Setup screens
Configuring Static Routes
Static Routes provide additional routing information to your firewall. Under normal
circumstances, the firewall has adequate routing information after it has been configured for
Internet access, and you do not need to configure additional static routes. You must configure
static routes only for unusual cases such as multiple firewalls or multiple IP subnets located on
your network.