NEC WT615 - Manual (Page 119)

112
To select a wireless LAN access point:
1. On the "Profile" tab, select "Profiles" and then select "Profile 1" or "Profile 2".
2. On the "Profile" tab, select "Advanced” and press the ENTER button.
3. On the Advanced menu, select "Network Type" → "Site Survey" and press the ENTER button.
4. Select "Mode" and then select "Infrastructure".
See pages 113 and 114 .
To receive error messages or information on the remaining lamp life via e-mail:
1. On the "Mail" tab, select "Alert Mail" and press the ENTER button. A check mark will be placed.
2. Set "Sender's Address", "SMTP Server Name" and "Recipient's Address". Select “OK” and press the
ENTER button.
See page 117 .
To execute "Easy Connection” using Image Express Utility 2.0:
The "Easy Connection" is a mode that can abbreviate the troublesome LAN settings when using the Image Ex-
press Utility 2.0 and connecting the PC and projector via a wireless LAN.
The Image Express Utility 2.0 is contained on the supplied User Supportware 2 CD-ROM. To use "Easy Connec-
tion", select "Profile"
→ "Profiles" → "Easy Connection". See page
113 .
6. Using On-Screen Menu