NEC WT615 - Manual (Page 92)

85
¿ Menu Descriptions & Functions [Source]
Computer
Selects the computer connected to your Computer input connector signal.
NOTE: An optional component cable (Component V or ADP-CV1 cable) is needed for a component signal.
DVI (DIGITAL/ANALOG)
Selects the computer connected to the DVI input connector.
Video
Selects what is connected to your Video input-VCR, laser disc player, DVD player or document camera.
S-Video
Selects what is connected to your S-Video input-VCR, DVD player, or laser disc player.
NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or S-
Video source.
Viewer
This feature enables you to make presentations using a PC card that contains captured images and slides created
with the exclusive Photo Explore 8.0 for NEC contained on the CD-ROM. See the supplied “Wired and Wireless
Network Setup Guide” for installing the Photo Explore 8.0 for NEC.
See page
71 for viewing slides.
LAN
Selects a signal from the NEC optional wireless LAN card or a commercially available wired LAN card plugged into the
projector's card slot.
Test Pattern
Displays a test pattern to check your adjustments or image position.
NOTE:
• Select “Computer” for your source signal even when the COMPUTER IN connector is connected to a component signal.
• When you select “Viewer” or “LAN” for your source signal, sound of the DVI-I AUDIO IN mini jack will come from the speaker.
6. Using On-Screen Menu