NEC WT615 - Manual (Page 88)

81
ᕡ Using the Menus
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE: The commands such as ENTER and EXIT in the gray bar show available buttons for your operation.
2. Press the SELECT
̇
or
̈
buttons on the remote control or the projector cabinet to display the
submenu.
3. Press the ENTER button on the remote control or the projector cabinet to select the top item or the first
tab.
4. Use the SELECT
̆
or
̄
buttons on the remote control or the projector cabinet to select the item you
want to adjust or set.
You can use the SELECT
̇
or
̈
button on the remote control or the projector cabinet to select the tab
you want.
NOTE: You can select a tab only when the tab color is orange.
5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window.
6. Adjust the level or turn the selected item on or off by using the SELECT
̆̄̇
or
̈
button on the remote
control or the projector cabinet.
Changes are stored until that particular function is adjusted again.
7. Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the
projector cabinet to quit the menu display.
NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.
Main menu
Submenu window
Currently available
buttons
Submenu
6. Using On-Screen Menu