NEC WT615 - Manual (Page 69)

62
4. Convenient Features
¸ Using a USB Memory Device or USB Memory Card Reader
The projector is compatible with either a USB memory device (A
USB memory device is supplied with the WT615) or USB memory
card reader which supports the viewer and security features.
[Important]
When saving captured images to a USB memory device on the
WT615, be sure to use the USB memory device included with the
WT615. A commercially available USB memory device may be dam-
aged.
Also do not use a commercially USB memory card reader. Using a
USB memory card reader may cause damage to a flash memory
card.
• To use a USB memory device or USB memory card reader,
connect the device to the USB port (type A).
• Select one of the drive icons for your USB memory in a pane
on the left side of the Viewer window.
• To use a USB memory device as a Protect key for Security
function, select one from the Drive icons in the Security setting
screen. See page
107 .
• The drive icon is not displayed on the WT610.
NOTE:
• Some USB memory devices (brands) or USB memory card readers may not work.
• The projector does not support NTFS formatted flash memory card or USB memory device.
Be sure to use a flash memory card or USB memory device formatted with the FAT32, FAT16 or FAT file system.
To format your flash memory card or USB memory device in your computer, refer to the document or help file that comes with
your Windows.
• You cannot use a USB memory device and a USB memory card reader when connecting a USB mouse to the projector.
• Do not do the following while the USB memory device or USB memory card reader’s access indicator is lit or flashing (while
data is being accessed.) Doing so can damage your USB memory device or USB memory card reader in the reader. Back up
your data in case it will need to be restored.
* Pulling out the USB memory device or USB memory card reader from the USB port of the projector.
* Pulling out the memory card from the USB memory card reader
* Turning off the main power switch or unplugging the power cable.
• The drive for ”USB 1-4” is displayed only when the USB memory device or USB memory card reader is connected to the
projector. The drive for “USB 1-4” may be displayed differently from the one in the USB memory card reader.
• Some USB memory devices (brands) or USB memory card readers cannot be used as Protect key for the projector’s Security
function.
PC CARD
AUDIO IN
R L /MONO
VIDEO IN S-VIDEO IN DVI-I IN COMPUTER IN MONITOR OUT
DVI-I COMPUTER AUDIO IN AUDIO OUT PC CONTROL REMOTE IN USB
USB