NEC UNIVERGE SV7000 - Manual (Page 12)

– 8 –
6 Programmable Keys
[Programmable by telephone system administrator
(Flexible Line/Feature Keys)]
• Station line access
• Trunk line access
• Feature access
[Programmable by user (Flexible Line)]
<Flexible Line>
•
Station line access
• Trunk line access
• Feature access
7 Recall
Press key to terminate established call and returns
to the internal dial tone.
8 Feature
Used to activate terminal setup functions and to
program One-Touch Speed Dial/Feature Keys.
9 Directory (Note 3)
Press key to activate speed calling - system feature.
10 Message (Note 3)
Press key to access the voicemail system.
11 Mic
Press key to respond hands free. LED on this key
lights during speakerphone operation.
12 Conf
Press key to establish a three-way conversation.
LED on key lights when key is active.
13 LNR/SPD (Last Number Call/Speed Calling)
Press key to activate redial feature. Press redial and
scroll back through numbers that have been dialed.
Until the desired number is displayed.
Press the
or # (Note 4) key to activate dialing.
14 Microphone
Built-in microphone is used for hands free operation
with speakerphone.
15 Up/Down
( DOWN UP )
Used to adjust LCD contrast, speaker/receiver vol-
ume, and ringer volume.
• LCD Contrast:
Press ( ) or ( ) key while idle.
• Speaker/Receiver Volume:
Press ( ) or ( ) key during conversation.
• Ringer Volume:
Press ( ) or ( ) key during ringing.
16 Answer
When LED on this key is lighted, press key to
answer a waiting call.
17 Speaker
Controls the built-in speaker which can be used for
Hands Free dialing/monitoring.
LED on key lights when key is active.
18 Transfer
Allows the station user to transfer established calls
to another station, without attendant assistance.
19 Hold
Press key to place an internal or external call on
hold.