NEC UNIVERGE SV7000 User Manual
Page 33
– 29 –
To Originate a Call Using Speed Calling (One-touch Buttons)
Press the desired Speed Call button, or press Speaker and Speed Call.
To program
(Available only on D
term
stations with speed calling keys.)
Press Feature button.
Press desired Speed Call button.
Enter desired telephone number or feature code on the keypad.
Display indicates digits dialed.
Press Feature again to save the number.
To verify (with D
term
8D/16D/32D)
Press Feature button.
Press desired Speed Dial button.
Display indicates digits programmed.
Note 1:
To program a hook switch for transfer or feature activation, press
Recall key as first digit. (! displays on LCD.)
Note 2:
To program a pause, press the
Recall key as any digit other than the first digit. (– displays on LCD.)
Note 3:
To program a Voice Call, press
Transfer key after dialing station number. (V displays on LCD.)
Note 4:
Speed calling for feature access:
Speed call keys may be used
as a feature key by storing the UNIVERGE SV7000 feature access code. The features
may be pr
ogrammed on a system basis by the
system administrator
.
Access codes may be stored in conjunction with telephone numbers. For example, one button can be programmed
by the user to transfer to a certain extension.
(Time display)
SPEED SET