NEC UNIVERGE SV7000 - Manual (Page 41)

– 37 –
To Place a Call on Hold
Press Hold. Held line wink flashes.
Note: If held line appears on other D term stations, the associated LED flashes
red slowly.
To retrieve
Lift handset or press Speaker.
Press held line. Use handset to converse.
Note: Any station with this line appearance can retrieve the call.
If unanswered
After preprogrammed time, Automatic Recall is initiated.
Visual and audible signal (rapid flash and ring burst) is sent to station that placed call on hold.
Note 1: A transfer or conference call may be placed on hold depending on software level of the UNIVERGE SV7000.
Note 2: Hold shows as a flashing green LED on your phone. The same line on other phones shows as a flashing red LED.
Recall shows as a flashing green LED on your phone and flashing red LED on other phones with the same line.
To Place a Call on Exclusive Hold
Press Hold twice. Line appearance indicates interrupted wink.
Note: If held line appears on other D term stations, LED remains steadily lit red.
To retrieve
Lift handset or press Speaker.
Press held line. Use handset to converse.
Note: Only the D term that set Exclusive Hold option can retrieve the call.
Held station
number
(Time display)
HOLD 2001
Held station
number
(Time display)
E_HOLD 2001