NEC UNIVERGE SV7000 - Manual (Page 64)

– 60 –
Boss/Secretary Override
Example: Station 2000 is boss, Station 2001 is secretary.
Boss is connected to Trunk A.
Incoming call on Trunk B connects to secretary, but is intended for boss.
To program boss/secretary override key
Press Feature.
Press a Speed Calling key.
Dial “Boss/Secretary Override” access code.
Press Recall. – displays on LCD.
Dial boss’ station number.
Press Feature again.
Secretary
Lift handset to answer Trunk B, ask caller to hold.
Press CALL HOLD feature key or Transfer and dial call hold access code.
Receive dial tone.
Press BOSS/SEC OVERRIDE.
Receive ringback tone.
Boss
Hear 3 bursts of tone. LCD display indicates:
Option 1
Boss presses Answer and converses with secretary. Trunk A is placed on hold.
Secretary hangs up. Boss is connected to Trunk B.
Boss can alternate between the two parties by pressing Answer.
Boss’ station
number
(Time display)
C WAIT 2000
Secretary’s station
number
(Time display)
C WAIT 2001