NEC UNIVERGE SV7000 - Manual (Page 44)

– 40 –
To Answer a Camped-on Call
(from the attendant)
While engaged in a call, receive the camp-on indication (one short tone burst). Answer LED flashes.
Press Answer. Call in progress is placed on hold.
Connection to camped-on call is established.
Press Answer to return to original call. Camped-on call is placed on hold.
By repeating these steps, it is possible to alternate between calls. Display
indicates connected station or trunk at any given time.
Call Waiting – Originating
To program call waiting key (on one-touch speed calling key)
Press Feature.
Press desired one-touch speed key.
Press Recall. ! appears on LCD. (See Note.)
Dial “Call Waiting” feature access code.
Press Feature.
Note: To program a hook switch for transfer or feature activation, press Recall as first digit. ! displays on LCD.
To activate call waiting – originating
Dial desired station number, receive busy tone.
Press CALL WAITING.
Receive special ringback tone.
Call waiting tone is sent to busy station.
type
Trunk
number
Trunk
(Time display)
CAMP ON DDD 3
Called station
number
(Time display)
C WAIT 2000