NEC UNIVERGE SV7000 - Manual (Page 21)

– 17 –
PICK (Call Pickup – Group)
Permits a station user to answer any calls directed to other lines in the user’s preset Call Pickup Group.
CONF (Three-way Calling)
Enables a station user to establish a three-way conference by connecting an additional party to an already existing
conversation.
VOICE (Voice Call)
Enables the user to make a call to the called party’s built-in speaker. If the called party’s MIC is on, the called party
can converse hands-free.
S-SPD (Speed Calling – System)
Allows a station user to call certain frequently dialed numbers using fewer digits (abbreviated call codes) than would
normally be required.
CAS (CAS-Switch Hook Flash)
Allows the user to send a switchhook flash while on an outside trunk.
UCDBO (UCD Busy Out)
Allows a station user to block UCD calls and to cancel Busy Out.
FLASH (Flash)
Provides the station with a switchhook flash.
FDN (Call Forward – No Answer)
Permits a call to an unanswered station to be forwarded to a predesignated station if the called station does not
answer within a predetermined period of time.
C-RPT (ISDN Malicious Call Trace)
Allows the user to initiate a Call Trace on ISDN calls only.
G-SPD (Speed Calling – Group)
Allows a station user to share a set of common Speed Calling numbers with other station users in the group.
P-RLS (Privacy Release)
Allows another station to depress a busy line button and enter the conversation of a station already engaged in com-
munication.
DND (Do Not Disturb)
Allows a station user to deny access to the station line for incoming calls.