NEC EXPRESS5800 N8800-099F - Manual (Page 25)

Before Using 1-7
Use of Power Supply and Power Cord
WARNING
Do not handle power plugs with a wet hand.
Do not plug/unplug power cords with a wet hand. There is a risk of an electric shock.
Do not connect the ground wire to a gas pipe.
Never connect the ground wire to a gas pipe. There is a risk of a gas explosion.
CAUTION
Do not plug the cords in nonconforming outlets.
Use wall outlets with specified voltage and power type. There is a risk of a fire or
current leakage.
Avoid installing the server where you may need extension cords. If the cords do not
meet the power specifications, there is a risk of overheating that could lead to a fire.
Do not plug too many cords in a single outlet.
If the rated current is exceeded, there is a risk of overheating that could lead to a fire.
Do not plug the cords insecurely.
Insert the plug firmly into an outlet. There is a risk of heat or fire due to poor contact. If
dust settles on the slots and it absorbs moisture, there is also a risk of heat or fire.
Do not use nonconforming power cords.
AC cord is to spend the thing of the next specifications:
Maximum 4.5m (14.76ft) long. Rated minimum 125V, 10A, Type SJT flexible cord.
You also have to observe the following prohibitions to prevent an electric shock or fire
caused by damage to the cords.
„ Do not pull on the cords.
„ Do not pinch the cords.
„ Do not bend the cords.
„ Keep chemicals away from the cords.
„ Do not twist the cords.
„ Do not place any object on the cords.
„ Do not use cords as bundled.
„ Do not alter, modify, or repair the cords.
„ Do not staple the cords.
„ Do not use any damaged cord. (Replace it with a new one of the same
specifications. For replacement procedures, contact your sales agent.)