NEC EXPRESS5800 N8800-099F - Manual (Page 56)

4-4 Windows Setup
Step 1: Things Required for Setup
The following explains the setup procedure using the Express Setup program: 
IMPORTANT:
„ Because “Express Setup” formats the entire area of the disk used for reinstallation,
all data on that disk will be deleted. If there is any data partition other than system
partition that contains OS on the disk for reinstallation, you must back up important
data in the data partition first and then start “Express Setup.”
„ Do not apply service packs to NEC Express5800/ft series based on your judgment. If
you desire to apply service packs, contact your sales agent about application status
and apply service packs to NEC Express5800/ft series.

TIPS:
For the latest information on support for Windows Service Pack, contact your sales agent.

You need the following to install Windows Server 2003 R2 32-bit Enterprise Edition:
„ NEC EXPRESSBUILDER (CD-ROM)
„ GeminiEngine Control Software UPDATE CD-ROM
This CD-ROM is used to update GeminiEngine Control Software; it may not be shipped with
the equipment. (Not included if “NEC EXPRESSBUILDER” CD-ROM contains the latest
version of software programs at the time of shipment.)
„ Microsoft® Windows Server™ 2003 R2 32-bit Enterprise Edition Disk1
(hereinafter referred to as “Windows Server 2003 CD-ROM”)
Microsoft® Windows Server™ 2003 R2 32-bit Enterprise Edition Disk2
„ User’s Guide (Setup) (this manual)
„ User’s Guide
IMPORTANT:
„ About the latest release of GeminiEngine Control Software and purchase of the
latest version of its Update CD-ROM, ask your sales agent.
Before starting the setup, decide the size of the partition where the operating system will be
installed.