NEC EXPRESS5800 N8800-099F - Manual (Page 99)

Procedures after Completion of Installation 5-3
Operation Environment
NEC ESMPRO Agent can be operated in the hardware and software environments shown below.
„ Hardware
x Installation system NEC Express5800/ft series
x Memory Memory capacity required to operate OS + 25.0 MB or
larger
x Empty capacity of hard disk 50.0 MB or larger
„ Software Windows Server 2003 SP1
Preparation before Setup
Be sure to read the following description before system installation or setup.
To operate NEC ESMPRO Agent, you need to make settings of TCP/IP and the SNMP of
components associated with TCP/IP.
TCP/IP Setting
See the Help started from the Start menu for how to set TCP/IP.
SNMP Service Setting
To install the SNMP Service:
1. Open [Add/Remove Programs] in [Control Panel].
2. Click [Add/Remove Windows Components].
3. Select [Management and Monitoring Tools] in the Windows component wizard and click
the [Details...] button.
4. Check the check box of [Simple Network Management Protocol].
5. Click the [Next] button.
The file copy operation is started.
6. After the file copy is finished, click the [Finish] button.