NEC SP5008A - Manual (Page 15)

14
2.2.4 LAN Setting
ITEM Description
LAN IP address Specify the IP address of the SP5008A /
SP5018A / SP5058A LAN port.
LAN mask address Specify the mask address for SP5008A /
SP5018A / SP5058A LAN port.
DHCP server Enable/Disable DHCP function on the LAN port.
Once enabled, the LAN ports will function as a
DHCP server, network devices connected to
them will be issued with IP addresses.
IP address from When DHCP is enabled, you can specify the IP
address to start from when assigning to attach
network devices.
IP address to When DHCP is enabled, you can specify the
ending IP address assigned to the attached
network devices.