NEC SP5008A - Manual (Page 26)

25
No Answer Forward Time (FXS only) If you enable the No Answer Forward
function (Representative number or
L1~L8 number), please specify the
time of no answer. The default setting
is 30 sec.
FAX Enable/Disable FAX T.38 function.
Line1~Line8 relevant data
Type Displays the port type of that particular line.
Enable Enable the line or not
Reg Register or Unregister to SIP Proxy
Number Displays the line numbers that specified in SIP Setting.
Account: Input the SIP Proxy registration account ID.
Number: Input the phone number.
Password: Input the password of IP Proxy registration account
ID.
Display name: Specify the Display name of the phone
number.
The first is the number registers to Primary proxy.
The default setting is 1000~1007.
Enable Hotline Click the check box to enable hotline feature. If enabled, The
check box will display as .
Hotline Number Specify the number to forward the call to when the Hotline
feature is enabled.
Wait to Hotline(sec) Specify the time (sec) for wait to hotline, the default value is 0.
Forward Type Specify the forwarding type to use, you can choose the
following:
z Disable
z Unconditional
z Busy
z No Answer (FXS only)
z Busy and No Answer (FXS only)
The “Disable” option will allow you to disable this particular
function.
Forward Number Specify the number to forward the call to when the call
forwarding feature is enabled.
Call Waiting (FXS only) Enable/Disable per-line Call Waiting function.
DND (FXS only) Enable/Disable per-line DND (Do Not Disturb) function.
Greeting (FXO only) Enable/Disable Greeting for FXO