NEC SP5008A User Manual
Page 38
37
z
Auto
T.30 FAXByPass Codec
Select the FAX ByPass Codec to use, you can
choose the following:
z
G.711 a-law
z
G.711 u-law
z
G.726 32k
Flash key function (FXS only)
Select the function of Flash key, you can choose
the following:
z
Disable
z
Transfer
z
SIP Message
Keypad DTMF type
Select the type of Keypad DTMF, you can
choose the following:
z
In-Band
z
RFC2833
z
SIP Info
End of dial key
Select the End of dial key, you can choose the
following:
z
Disable
z
*
z
#
DTMF Detection Sensitivity
Specify the grade of DTMF Detection Sensitivity,
the value range is (1~5)
Dial Wait Timeout (1~60sec)
Specify the duration of dial waiting when the
receiver is off hook. The range is 1~60 sec.
Inter Digits Timeout (1~5sec)
Specify the interval of input digits, if the interval is
over the setting, the system will end the dial and
send out the DTMF. The limitation range is
1~5sec.
FAXByPass Keyword
Some SIP Proxy need specify special keyword
for FAXByPass function. Input the data as SIP
Proxy required.
FAXByPass Keyword
Some SIP Proxy need specify special keyword
for FAXByPass function. Input the data as SIP
Proxy required.
IP Address announcement
You can Enable/Disable this function,
If you select Enable, you can connect T1 port
with a phone set and press #120#, you will hear