NEC SP5008A - Manual (Page 51)

50
3.2.8 Dial Plan
Dial Plan Editor Using this feature, users can specify the number that will be
immediately dialed out without having to press the “#” (at the
end of the dialed number) on the keypad or until the dial time
timeout period. The number can be specified depending on
the length of the dialed number, or the prefix of the dialed
number.
For example, if the user sets:
First Example
z Function: Enable
z Leading digit: 02
z Total Digit count: 10
If the user dials a 10 digit number with a prefix of 02 (e.g.
0282265699), the MICRONET SP5008A / SP5018A / SP5058A
will immediately detect it and dial this number straight away.
Second Example
z Function: Enable
z Leading digit:
z Total digit count: 8
If the user dials an 8 digit number (e.g. 82265699), the
MICRONET SP5008A / SP5018A / SP5058A will immediately
detect it and dial this number straight away.
Third Example
z Function: Disable