NEC SP5008A - Manual (Page 33)

32
3.1.7 CDR Setting
CDR mode Select the CDR mode for Enable or Disable. If
you Enable this feature, please specify the CDR
Server address and port number at the CDR
server address and port’s text box, then you can
get Call Detail Data form CDR Server.
CDR Server address If you Enable the CDR mode, please specify the
IP address of CDR Sever for data storage.
CDR Server port Specify the CDR Server port number,
The default port number is 514.
1. Press the “Apply” button (at the bottom) after you finish to save changes.
2. Press the “Reboot” button to apply the changes.
NOTE: To receive the SYSLOG CDR, you need to have a syslog server to collect
the CDR from MICRONET SP5008A / SP5018A / SP5058A. The following is a tool
you can be used for testing purpose which can be downloaded from
http://tftpd32.jounin.net/. You need to enable syslog server from settings before you
can use it.