NEC SP5008A - Manual (Page 57)

56
Updating the firmware by TFTP
1. First, download the TFTP program from our website. Unzip the TFTP to a
directory that you desire in your hard drive and execute the TFTP program.
Make sure that the TFTP program points to the directory of where your firmware
is stored. Now, leave the TFTP program running and switch back to the
MICRONET SP5008A / SP5018A / SP5058A web configuration interface.
2. Under Device Management => Software Upgrade select TFTP mode in the
drop down list.
3. Key in the IP address of the TFTP server and specify the correct filename of the
firmware.
4. Press the Start button (next to the Target file name text box) to execute the
upgrade process.
5. Please wait while the device updates itself with the firmware.
6. After the update process is finish, you will be taken to a web page indicating
that it was successful (see figure below).
7. Press the “Reboot” button to apply the changes.